AntMiner T9+ 10.5TH/s @ 0.136W/GH 16nm ASIC Bitcoin & Bitcoin Cash Miner

Amazon

US $1,995.00

Product Description

Hash Rate: 10.5TH/s (±7% is expected). Power Consumption: 1450W (±10%) at the wall (with Bitmain's APW3++ PSU, 93 percent efficiency, 25C ambient temp). Power Efficiency: 0.126 J/GH at the wall (with Bitmain's APW3++ PSU). Noise level: Loud. Not for desk-top use. Sounds like a vacuum. Chip quantity per unit: 162 x BM1387. Rated Voltage: 11.60 ~13.00V. Operating Temperature: 0C to 40C. Network Connection: Ethernet (cable not included). Notes: 1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return. 2. Each AntMiner T9+ requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Power supply unit is not included. Bitmain recommends the APW3++ if you are using a 220v outlet *OR* the EVGA SuperNova 1600 G2 if you are using a standard 110v outlet.

Tweets

Product Review

Related Product